H3C S7500 Series Command Manual

Also see for S7500 Series: Operation manual Operation manual Operation manual Operation manual Command manual

Contents

H3C S7500 Series Command Manual Manual pdf 5 page image

Command Manual – Link AggregationH3C S7500 Series Ethernet SwitchesChapter 1 Link Aggregation ConfigurationCommands1-4AL AL Partner ID Select Standby Share MasterID Type Ports Ports Type Port-------------------------------------------------------------------1 D 0x8000,000f-e20f-ff01 1 0 NonS Ethernet4/0/110 M none 1 0 NonS Ethernet4/0/220 S 0x8000,000f-e20f-ff01 1 0 NonS Ethernet4/0/3Table 1-3 Description on the fields of the display link-aggregation summarycommandField DescriptionActor ID Local device IDAL ID Aggregation group IDAL Type Aggregation group type: D (dynamic), S (static), or M (manual)Partner ID ID of the remote deviceSelect Ports Number of the selected portsStandby Ports Number of standby portsShare Type Load sharing type: Shar (load-sharing), or NonS(non-load-sharing)Master Port Master port number1.1.4 display link-aggregation verboseSyntaxdisplay link-aggregation verbose [ agg-id ]ViewAny viewParametersagg-id: ID of the aggregation group to be displayed, which must be the ID of an existingaggregation group, in the range of 1 to 384.DescriptionUse the display link-aggregation verbose command to display the details about aspecified aggregation group, including:z Aggregation group ID, aggregation group type, load sharing type, aggregationgroup description string;z Local end details: device ID, port number, port status, port priority, LACP flag,operation key and connection status;

/ 12

Related manuals for H3C S7500 Series

H3C S7500 Series Command Manual

H3C S9500 Series Command Manual

This manual is suitable for:

S7500 Series

manualsdatabase

Your AI-powered manual search engine