H3C S7500E-X Configuration Manual

Also see for H3C S7500E-X: Configuration Examples Configuration Examples Command reference Configuration guide

Contents

149• VLANs 5 and 10 are primary VLANs on Device B. The uplink port GigabitEthernet 1/0/1 onDevice B permits the packets from VLANs 5 and 10 to pass through tagged.• On Device B, the downlink port GigabitEthernet 1/0/2 permits secondary VLAN 2. The downlinkport GigabitEthernet 1/0/3 permits secondary VLAN 3. Secondary VLANs 2 and 3 areassociated with primary VLAN 5.• On Device B, the downlink port GigabitEthernet 1/0/6 permits secondary VLAN 6. The downlinkport GigabitEthernet 1/0/8 permits secondary VLAN 8. Secondary VLANs 6 and 8 areassociated with primary VLAN 10.• Device A is aware of only VLANs 5 and 10 on Device B.Figure 46 Network diagramConfiguration procedure1. Configure Device B:# Configure VLANs 5 and 10 as primary VLANs. system-view[DeviceB] vlan 5[DeviceB-vlan5] private-vlan primary[DeviceB-vlan5] quit[DeviceB] vlan 10[DeviceB-vlan10] private-vlan primary[DeviceB-vlan10] quit# Create VLANs 2, 3, 6, and 8.[DeviceB] vlan 2 to 3[DeviceB] vlan 6[DeviceB-vlan6] quit[DeviceB] vlan 8[DeviceB-vlan8] quit# Associate secondary VLANs 2 and 3 with primary VLAN 5.[DeviceB] vlan 5[DeviceB-vlan5] private-vlan secondary 2 to 3[DeviceB-vlan5] quit# Associate secondary VLANs 6 and 8 with primary VLAN 10.