H3C S9500E Series Command Reference Manual

Also see for S9500E Series: Card Manual Configuration guide Quick start guide Security configuration guide Configuration guide

Contents

H3C S9500E Series Command Reference Manual Manual pdf 22 page image

irf member priorityer-id priority priorityo irf member member-id priorityViewDefault leanage levelParametee range of 1 to 4.of 1 to 32. The greater the priority value, theDescrimember of an IRF fabric.he irf priority command. If you want this switch to be elected as theith the irf priority command.In IRF mode, use the irf member member-id priority priority command. The priority specified byusing this command will influence role election during the running process of the IRF fabric. Fored as thee IRF fabric merge happens, the IRF fabric whose master has the highest.# When the switch with the member ID of 2 operates in IRF mode, specify its priority as 32.ember renumberer-id renumber new-member-ido irf member member-id renumberViewSyntaxirf member membundSystem viewvel3: Mrsmember-id: Specifies the ID of an IRF member switch, which is in thpriority: Specifies the priority value, which is in the rangehigher the priority. A member with a higher priority is more likely to be a master.ptionUse the irf member priority command to specify a priority for aUse the undo irf member priority command to restore the default.By default, the priority of a member of an IRF fabric is 1.When the switch operates in different modes, use different commands to specify a priority for it:• In standalone mode, use tmaster, specify its priority w•example, when the master leaves the IRF fabric, the switch with the highest priority is electnew master. When thpriority wins the election.Related commands: irf priorityExamples system-view[Sysname] irf member 2 priority 32irf mSyntaxirf member membundSystem viewDefault level3: Manage level16