H3C S9500E Series Command Reference Manual

Also see for S9500E Series: Card Manual Configuration guide Quick start guide Security configuration guide Configuration guide

Contents

H3C S9500E Series Command Reference Manual Manual pdf 28 page image

[Sysname] irf-port 2/2-port 2/2] quitort-numbero irf-port port-numberViewDefault leParametert-number: Specifies the IRF port number. The value can be either 1 or 2.Descriptir command to create an IRF port and enter IRF port view when the switchode. If the IRF port is already created, this command enters IRF port view.er command to delete the specified IRF port.rt is created on the switch.Related commands: port group interface.# Create IRF port 1 on the switch operating in standalone mode.[Sysname] irf-port 1] quitenablep enableo mad arp enableViewDefault levelParameteoneDescriptimmand to enable ARP MAD to detect the IRF fabric for multi-active collisions..[Sysname-irfirf-port pSyntaxirf-port port-numberundSystem viewvel3: Manage levelrspoonUse the irf-port port-numbeoperates in standalone mUse the undo irf-port port-numbBy default, no IRF poExamples system-view[Sysname-irf-port 1mad arpSyntaxmad arundVLAN interface view3: Manage levelrsNonUse the mad arp enable coUse the undo mad arp enable command to disable ARP MAD22