Installation ManualH3C S9500 Series Routing Switches Chapter 5 Troubleshooting and Maintaining the Switch5-236. Modify Flash description area7. Modify bootrom password0. RebootEnter your choice(0-7):Enter your choice(0-7): 6Please input '0' or '1' ('0':Boot from Flash, '1':Boot from CF card)BootDev = 1CF card FileName = S9500-XN.app 9500.appThe file name you input is 9500.app,Are you sure? Yes or No(Y/N)Y5.3.3 Local or Remote Loading through CLIIf your terminal is connected to the switch over a network, you can load Boot ROM andhost program at the remote through CLI.I. Loading using FTPRun FTP server on a local PC, provided you have configured username and passwordand have set the correct file directory. Suppose IP address of the PC is 10.10.110.1.Log on to the switch using Telnet or through the Console port to send host program tothe switch using FTP.Suppose that the main boot file is SWITCH002.app; the active host program isSWITCH001.app; the Boot ROM program is SWITCHbtm.btm. You can follow thesesteps after logging on to the switch.1) Download the software to the switch using FTP. ftp 10.10.110.1Trying ...Press CTRL+K to abortConnected.220 WFTPD 2.0 service (by Texas Imperial Software) ready for new userUser(none):9500331 Give me your password, pleasePassword:230 Logged in successfully[ftp] get SWITCH002.app SWITCH002.app[ftp] get Switchbtm.btm Switchbtm.btm[ftp] bye
