54Hardware management and maintenanceThis chapter includes these sections:• Displaying hardware information of the router• Displaying the alarming thresholds of a module• Port configuration and management• Active and standby switchover for MPUs• Solving system faults• Saving the current configuration of the router• Rebooting a module or routerNOTE:The output depends on your router model. For more information about the commands used in this chapter,see theH3C SR6600 Routers Command References.Displaying hardware information of the routerDisplaying the software and hardware version information ofthe routerUse the display version command to display software and hardware version information of the router.The output includes the following information: the current software version and hardware version, routeroperating time, type and operating time of each main processing unit (MPU) and service module. Theoutput of this command depends on your router model. display versionH3C Comware Platform SoftwareComware Software, Version 5.20, R0600Copyright (c) 2010 Hangzhou H3C Technologies Co., Ltd.H3C SR6608 uptime is 0 week, 0 day, 0 hour, 6 minutesSlot 0: RPE-X1 uptime is 0 week, 0 day, 0 hour, 6 minutesCPU type: FREESCALE MPC8548 1000MHz1024M bytes DDR2 SDRAM Memory4M bytes Flash Memory128K bytes NVRAMPCB Version: Ver.BBasic Logic Version: 134.0Extend Logic Version: 133.0Basic BootWare Version: 1.36Extend BootWare Version: 1.39[FIXED PORT] CON (Hardware)Ver.B, (Driver)1.0, (Cpld)133.0[FIXED PORT] AUX (Hardware)Ver.B, (Driver)1.0, (Cpld)133.0
