H3C SR6608/6604 Routers Installation Manual Chapter 7 Maintaining Software7-43You can clear the super password by selecting 8 on the main menu.================================================|<1> Boot System ||<2> Enter Serial SubMenuSub-menu ||<3> Enter Ethernet SubMenu ||<4> File Control ||<5> Modify BootWare Password ||<6> Skip Current System Configuration ||<7> BootWare Operation Menu ||<8> Clear Super Password ||<9> Storage Device Operation ||<0> Reboot |======================================================================Enter your choice(0-9):8The system displays the following information indicating that you have successfullycleared the super password.Clear Application Password SuccessNote:z After you clear the super password, quit the menu and reboot the router, you canenter system view directly.z This setting (super password clearing) is valid only for the first reboot of the router.The super password will be restored after a second reboot.7.8 Backing Up and Restoring BootWareYou can back up and restore BootWare on the BootWare operation sub-menu.Select 7 on the main menu to enter the BootWare operation sub-menu. Refer to section7.2.5 “BootWare Operation Sub-menu” on page 7-12 for details.7.8.1 Backing Up the Entire BootWareTo back up the entire BootWare, you need to back up the basic segment and then theextended segment of the BootWare .Select 1 on the BootWare operation sub-menu, and the system prompts:Will you backup the Basic BootWare? [Y/N]Enter Y:Begin to backup the Basic BootWare....................Done!
