38Configuring a priority mapping tableConfiguring a port to trust packet priority for priority mappingConfiguring the port priority of a portConfiguring priority mappingConfiguring a priority mapping tableThe AC provides various types of priority mapping table, as listed below.dot11e-lp: 802.11e-to-local priority mapping table.dot1p-lp: 802.1p-to-local priority mapping table.dscp-lp: DSCP-to-local priority mapping table, which is applicable to only IPpackets.lp-dot11e: Local-to-802.11e priority mapping table.lp-dot1p: Local-to-802.1p priority mapping table.lp-dscp: Local-to-DSCP priority mapping table.Follow these steps to configure a priority mapping table:To do… Use the command… RemarksEnter system view system-view —Enter priority mappingtable viewqos map-table{ dot11e-lp | dot1p-lp| dscp-lp | lp-dot11e| lp-dot1p | lp-dscp }RequiredEnter the view of the priority mappingtable to be modified.Support of the H3C WX series accesscontrollers for priority mapping tables mayvary by AC model. For more information,see Compatibility Matrices.Configure the prioritymapping tableimportimport-value-listexport export-valueRequiredNewly configured mappings overwrite theold ones.Display theconfiguration of thepriority mappingtabledisplay qosmap-table[ dot11e-lp | dot1p-lp| dscp-lp | lp-dot11e| lp-dot1p | lp-dscp ]OptionalAvailable in any view
