H3C s5800 series Troubleshooting Manual

Also see for s5800 series: Installation manual Instruction manual Command reference Quick start Command reference

Contents

H3C s5800 series Troubleshooting Manual Manual pdf 26 page image

25If the current power, average power, and peak power of the PSE are close to or reach themaximum power of the PSE, use PoE power with higher-wattage supply.If the PSE Pd-policy Mode field displays disable, execute the poe legacy enable pse commandto enable nonstandard PD detection by the PSE.e. Execute the display poe interface gigabitethernet 1/0/1 command in any view to displaypower supply information for GigabitEthernet 1/0/1. Verify the following:− The current power, average power, and peak power of the PoE interface are correct.− The PoE interface current and voltage are correct. display poe interface gigabitethernet 1/0/1Port Power Enabled : disabledPort Power Priority : lowPort Operating Status : offPort IEEE Class : 0Port Detection Status : disabledPort Power Mode : signalPort Current Power : 0 mWPort Average Power : 0 mWPort Peak Power : 0 mWPort Max Power : 30000 mWPort Current : 0 mAPort Voltage : 0.0 VPort PD Description :If the current power, average power, and peak power of the PoE interface are close to or reachthe maximum power of the PoE interface, execute the poe max-power command to configurethe maximum power with higher-wattage supply.3. If the problem persists, contact H3C Support.Related commandsThis section lists the commands that you might use for troubleshooting PoE.Command Descriptiondisplay poe device Displays PSE information.display poe pse Displays detailed PSE information.display poe interface interface-typeinterface-number Displays power supply information for PoE interfaces.poe legacy enable pse Enables the PSE to detect nonstandard PDs.poe max-power Configures the maximum power for a PoE interface.

/ 26

Related manuals for H3C s5800 series