HAKO 980 E/EH Instruction Manual

HAKO 980 E/EH Instruction Manual Manual pdf 36 page image

5.5 Working With the Hako-JonasThe driver is requested to carefullyread this operator's manual. All con-trols are marked with easy-to-under-stand symbols that ease familiariza-tion. First driving attempts should belimited to clear areas until you arefamiliar with all controls and their func-tions.Please comply with the fol-lowing safety provisions:When working with theHako-Jonas 980 E/EH all sa-fety measures generally ap-plicable for handling vehi-cles and fuels have to beobserved. No passengertransport admitted with theHako-Jonas 980 E/EH. War-ning and instruction labelsattached to the machinecontain important informa-tion about safe operationand guarantee your perso-nal safety. Before commen-cing work,the operator has to makesure that the machine andits accessories are in properand safe condition andcomply with the provisionfor safety at work. Do notoperate the Hako-Jonas 980E/EH without protective de-vices.5.5.1 Switch Electro-Motor ON andOFFFor safety reasons, the Ha-ko Jonas 980 E/EH is equip-ped with a seat contactswitch. Starting the engineor running engine is possi-ble only when the driver isseated. If the seat contactswitch is activated with theelectro-motor running, resetby turning the key switchOFF and ON again.- Switch all levers and switches toneutral position.- Actuate parking brake- Turn key switch to "I"Check the drive pedal forbeing in neutral position be-fore switching ON.If the Hako-Jonas 980 E/EHis not used within the ad-missible conditions and en-vironments of use, the pro-tective functions mayrespond and switch off dri-ving function without priorwarning.Slow the machine down tostandstill by the service bra-ke in that case.Acknowledge protectivefunction by key switch.Overheating of the traveldrive assembly or controlmodule always entails acooling phase.The seat contact switch de-activated all functions, dri-ving function included.Slow the machine down tostandstill by the service bra-ke in that case.36Operation5.5 Working With the Hako-JonasThe driver is requested to carefullyread this operator's manual. All con-trols are marked with easy-to-under-stand symbols that ease familiariza-tion. First driving attempts should belimited to clear areas until you arefamiliar with all controls and their func-tions.the operator has to makesure that the machine andits accessories are in properand safe condition andcomply with the provisionfor safety at work. Do notoperate the Hako-Jonas 980E/EH without protective de-vices.5.5.1 Switch Electro-Motor ON andCheck the drive pedal forbeing in neutral position be-fore switching ON.If the Hako-Jonas 980 E/EHis not used within the ad-missible conditions and en-vironments of use, the pro-tective functions mayrespond and switch off dri-ving function without priorOperation