HAKO 980 E/EH Instruction Manual

HAKO 980 E/EH Instruction Manual Manual pdf 45 page image

457.4 Sealing Strips for Broom Com-partmentIn order to assure good function of thesweeper, a perfect condition of thesealing strips is required, especially inorder to attain the prescribed vacuumin the broom compartment, a cleansweeping result and the less possiblewear of the sealing strips (check thesealing strips of the broom compart-ment for wearing and damages inregular intervals).Replace defective sealing strips.The ground clearance of the lateraland rear sealing strips is adjustable(oblong holes in the sealing strips).Ground clearance =sides: approx. 1mmrear: approx. 4mm.Proceed to adjustment with the batteryset being mounted.Height of the front sealing strip (foldingapron) cannot be adjusted. Beingdragged, it has contact with the floor.7.5 Folding Apron AdjustmentAdjust folding apron- Turn engine off and pull key- Disconnect battery plug- Remove cover (as described in theparagraph "Mount/Dismount Cylin-der Broom").- Remove bolt (Fig. 19/2).- Modify adjustment by turning thefork head (Fig. 19/1).Modify adjustment suchthat the cylinder broomdoes not retract the sealingstrip of the folding apronduring operation.Maintenance/ServiceFig.197.4 Sealing Strips for Broom Com-partmentIn order to assure good function of thesweeper, a perfect condition of thesealing strips is required, especially inorder to attain the prescribed vacuumin the broom compartment, a cleansweeping result and the less possiblewear of the sealing strips (check theProceed to adjustment with the batteryset being mounted.Height of the front sealing strip (foldingapron) cannot be adjusted. Beingdragged, it has contact with the floor.7.5 Folding Apron Adjustment- Turn engine off and pull key- Disconnect battery plug- Remove cover (as described in theparagraph "Mount/Dismount Cylin-der Broom").- Remove bolt (Fig. 19/2).- Modify adjustment by turning thefork head (Fig. 19/1).Modify adjustment suchMaintenance/Service