HAKO 980 E/EH Instruction Manual

HAKO 980 E/EH Instruction Manual Manual pdf 46 page image

7.6 Replace Side BrushThe side brush is located at the frontright of the machine (standard ver-sion). Use the lever (Fig. 10/9) to liftand lower the side brush. The sidebrush is to be lightly inclined in for-ward and in outward direction. Theswinging area of the side brush arm islimited by stop screws. The side brushis driven by a V-belt. Fitting of asecond side brush for specific applian-ces is possible.Proceed as follows for dismounting ofthe side brush: Replace side brush- Turn engine off and pull key.- Secure machine by engaging par-king brake- Disconnect battery plug- Side brush lifted- Loosen hexagonal nut (Fig. 20/1)und remove together with washer- Remove bolt (Fig. 20/2)- Remove side brushProceed in inverse order for mountingof the side brush.46Maintenance/ServiceFig.207.6 Replace Side BrushThe side brush is located at the frontright of the machine (standard ver-sion). Use the lever (Fig. 10/9) to liftand lower the side brush. The sidebrush is to be lightly inclined in for-ward and in outward direction. Theswinging area of the side brush arm islimited by stop screws. The side brushProceed in inverse order for mountingof the side brush.Maintenance/Service