34English 3.1 OSD Setting MenusFollow the instructions indicated on the bottom of the screen. Press / onthe control panel or / arrow keys on the remote control to scroll through themenus. Press INPUT on the control panel or OK key on the remote control to selectan item. Press MENU to exit the OSD menu.3.2 Adjusting Picture Settings1 Press MENU to enter the OSD Main Menuscreen.2 Press / on the remote control toselect Picture menu.3 Press / OK on the remote control to enterthe Picture menu.4 Press / on the remote control to select an item.5 Press / OK on the remote control to enter the item.6 Press / on the remote control to change the scales or press / to select thedesired option. Press OK on the remote control to confirm.7 Press RETURN to return to the Picture menu.8 Press MENU to exit the Picture menu.9 The Picture menu can be used to adjust the Picture Mode, Brightness, Contrast,Sharpness, Color, Tint, Back Light, Color Temp, Aspect Ratio, Light Sensor, X-Contrast, Digital NR, Vivid Motion (SV42LMUB only), and Recall settings.Brightness, Contrast, Sharpness, Color, and Tint are only available for adjustments ifyou select User in Picture Mode. Press / on the remote control or VOL+/ VOL- onthe control panel to adjust these settings.• The Picture Mode can be set to Vivid, Standard, Movie, or User.• Press / on the remote control to move the scale in the Back Light settings.• Color Temp can be set to Warm, Standard, or Cool.• Aspect Ratio can be set to Full, Normal, Zoom, Subtitle, Auto.• Light Sensor can be set to Off or On.• X-Contrast can be set to Off or On.• Digital NR can be set to Off, Weak, Medium, or Strong.CH CHPictureAudioChannelV-CHIPSetupPicture ModeBrightnessContrastSharpnessColorTintBack LightColor TempAspect RatioNext PageExitReturnEnter MenuMove ReturnOK