HANNspree SV32AMUB User Manual
Also see for SV32AMUB: User manual
                                                           | |
Contents
| 
46English 4. During the setting process, releasing the electronic equipment button exits thesetting mode immediately without changing the status prior to setting.5. Buttons other than CH+/CH- are not functional during search. Channel buttonsinclude CH+ and CH-.6.1.5 Factory Setting ModeFactory setting operation procedures are as follows:1. Press the corresponding electronic equipment button. The indicator light will comeon for 2 seconds then it goes off; after 3 seconds, the indicator light will come onagain, showing setting mode has been entered.2. While holding the electronic equipment button, first press < (left arrow), then pressOK. The indicator then goes off and setting mode is exited, showing factory settinghas been restored.3. During the setting process, releasing the electronic equipment button exits thesetting mode immediately without changing the status prior to setting.4. Pressing any of the electronic equipment buttons to enter factory setting operationmode.5. The default current electronic equipment is TV upon first power-on.Electronicequipment Code NoteTV 1001 Provided bymanufacturerCABLE -- Transmit TV codeAUDIO -- Transmit TV codeDVD -- Transmit TV code |
Related manuals for HANNspree SV32AMUB
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine