Page 141.4.4 Sample Stream PrecautionsThe user is responsible to establish the potential hazard associated with each sample stream. Necessaryprecautions must be taken, to avoid physical contact with any harmful sample stream, which may containchemical or biological hazards.System components and their composition, which come in contact with the sample liquid and possible volatilegases from the sample, are tabulated in table 1 below. If there are suspected compatibility issues between thesample stream and BioTector components, please contact the manufacturer or the distributor.Table 1 System components and their compositionComponent MaterialTubing PFA (Per-fluoro-alkoxy)Fittings PFA (Per-fluoro-alkoxy)Stainless Steel (SS-316)PVDF (Poly-vinylidene-flouride)Pump Tubing EMPP (Elastomer-modified-poly-propylene)Connectors PP (Poly-propylene)Connector & Valve Tubing EMPP (Elastomer-modified poly-propylene)VitonSample (ARS) Valve PEEK (Poly-ether-ether-ketone)PVDF (Poly-vinylidene-flouride)Stainless Steel (SS-316)Reactor Hastelloy (C-276)Stainless Steel (SS-316)PFA (Per-fluoro-alkoxy)PTFE (Poly-tetra-fluoro-ethylene)Borosilicate GlassCirculation Pump KalrezPVDF (Poly-vinylidene-flouride)CeramicValve Seals KalrezVitonOxidized Sample Catch-pot/Cleaning Vessel Borosilicate GlassNDIR CO2 Analyzer Hastelloy (C-276)Stainless Steel (SS-316)NDIR CO2 Analyzer Lens SapphireTN Measuring Cell Quartz
