81Communication Menu9.5 PrinterThis menu provides the facility to print a number of reports directly to a printer. The printer mustbe connected to the instrument through the instrument USB-A port.The following information is available for printing:• Calibration reports• User action log files• Instrument configuration details• Measurements stored in the instrument memory• Cyclic measurements for continuous printing9.5.1 Install ferrite on the printer cableRefer to the following steps for the ferrite installation on the USB printer cable included with theLQV161.xx.20000 printer:ConfigurationPrinter configuration Currently only the USB port is a valid printer connection.Report configurationCalibration - Choose the channel(s) for which calibration reports arerequired. Choose to print the last report or all reports for the selectedchannel(s).User actions - Define the date and time criteria for which user action logsare required.Configuration - Choose the channel(s) for which instrument configurationdetails are required.Measurements - Choose the channel(s) for which measurement reports arerequired. Define the start and end times for the measurement reports.Cyclic measurements - Check the enable continuous mode checkbox andchoose the channel(s) for which cyclic measurements are required.Cancel - Exit the configuration option.Send filesChoose the report (or All) to print the reports that match the configuration criteria. A status barat the top of the screen shows printing progress.Push the Cancel button to cancel a print job.
