Hach SC4200c User Manual
Also see for SC4200c: Quick guideBasic user manualUser instructionsUser instructionsUser instructions
                                    | |
Contents
| 
Figure 4 Pole mountingInstall the instrument in a panelA rectangular hole is necessary for panel installation. Use the supplied sealing gasket for panelmount as a template to cut the hole in the panel. Make sure to use the template in the up position toinstall the controller vertical. Refer to Figure 5.Note: If using the bracket (optional) for panel mounting, push the controller through the hole in the panel and thenslide the bracket over the controller on the back side of the panel. Use the four 15 mm pan head screws (supplied)to attach the bracket to the controller and secure the controller to the panel.12 English |
Related manuals for Hach SC4200c
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine