Orbisphere 510/511/512 Analyzers - Communication Menu 95 of 138Operator Manual ORBISPHERE7.4.2 PC InterfaceOnce the server has been enabled and the interface information set up, access theinformation by launching an internet browser and typing “http://” followed by the servername that has been assigned to the instrument, in the address box as illustrated below:Once a valid username/password combination has been entered, the initial web page willbe displayed giving a list of options:Note:If TPO or TPA calculations have been enabled for a portable instrument, then this datais accessible from an additional option in the above screen entitled “TPO/TPAMeasurements stored / Channel n”, where n is the channel configured for TPO or TPAcalculations.If the enable security option has beenchecked on the instrument, you will berequired to enter a username and passwordon your PC to gain access to the web page.The username and password must be a validusername/password combination that hasbeen set up on the instrument (see also “UserManagement” on page 103 on how to set upusers on the instrument).Domain information is not required.
