Hach sc200 User Manual

Also see for sc200: Quick guide Software update Basic user manual User manual User manual

Hach sc200 User Manual Manual pdf 34 page image

• Data log files on the SD card are available in XML and binary formats.• DataCom is used to convert files from binary to CSV format. Refer tothe DataCom manual for more information on how to use theapplication. The DataCom manual, software updates and otherdownloadable resources are available at http://www.hach.com/download-resources.Updating softwareNotes:• The controller does not automatically transfer information to or from anSD card.• Each controller will have an associated folder on the SD system. Tomake sure software updates are in the correct folder for the controllerin use, it is best to use a separate dedicated SD card for each controller.1. From the Settings Menu, select SD Card Setup and push theENTER key.2. Select Upgrade Software and push the ENTER key.3. Select a device from the list and push the ENTER key. The list ofoptions includes the controller and all connected devices that havesoftware placed in the appropriate folder on the SD card.4. If more than one version of the upgrade software is available, select aversion and push the ENTER key.5. Push the ENTER key to begin the software transfer.The display will show "Transferring files. Please wait..." Thepercentage of completion appears in the bottom left corner of thedisplay. The upgrade cannot be halted once it has begun.• When the transfer is successful, the display will show "Transfercomplete" along with a prompt to push ENTER to restart thecontroller or to push the BACK key and exit to the SD Card Setupmenu. Controller updates take effect when the controller isrestarted. A restart is not necessary for sensor updates.• If the transfer is unsuccessful, the display will show "Transfer failed"and an error message. Press the ENTER key to acknowledge thewarning and exit out of the menu.Saving data and event logs with SD cardsNotes:• Data and event logs can be downloaded to an SD card and viewed withany device capable of reading an SD card.• Data logs store the measurement data at selected intervals in a packedbinary format (.flg file).• Event logs store a variety of events that occur on the devices such asconfiguration changes, alarms and warning conditions. Event logs areset up during the sensor or module configuration process. Event logsare stored in a CSV format.1. From the Settings Menu, select SD Card Setup and push theENTER key.2. Select Save Logs and push the ENTER key.3. If more than one device appears on the screen, all devices are selectedby default. To deselect an item, highlight the selection and push theleft arrow key. Select the devices from which logs will be saved andpush the ENTER key.4. Select the time period from which logs are to be saved.Option DescriptionLast Day All logs from the last full 24 hours, starting from 12:00 a.m., andany additional time remaining on the current dayLast Week All logs from the last full week (7 days) starting from 12:00 a.m.,and any additional time remaining on the current dayLast Month All logs from the last full month (30 days) starting from 12:00a.m., and any additional time remaining on the current dayAll Save all logs in memoryNew All logs that are new since the last time logs were saved to theSD card5. Push the ENTER key to confirm the choice, and push the ENTER keyagain to begin the file transfers.6. Allow time for the files to transfer. The display will show Transferringfiles. Please wait... and the percentage of files transferred.32 English