Hach sc200 User Manual

Also see for sc200: Quick guide Software update Basic user manual User manual User manual

Hach sc200 User Manual Manual pdf 35 page image

If the transfer is successful, the display will show "Transfer complete."If the transfer is not successful, the display will show "Transfer failed."7. Do one of the following:a. Push the ENTER key to exit back to the SD Card Setup menu.b. Push the HOME key to return to the measurement screen.c. Push the BACK keys to return to the Settings Menu.Access data and event log files on the SD cardA PC, a USB or other SD card reader device, Excel 2003 or higher (forXML files) or the Data Com application (for binary flg files) are necessaryto view the event and data logs stored on an SD card.Data logs have the following structure: Device Name, Device SerialNumber, Device Identification, Data Log, Time Stamp.Event logs have the following structure: Device Name, Device SerialNumber, Device Identification, Event Log, Time Stamp.To view data or event log files stored on the SD card:1. Attach the card reader device to the PC and install the SD card thatcontains the files in the reader device.2. In the SD card directory, open the HACH folder.3. Select the Logs folder.4. Select a device folder.The event and data log files in the folder are shown.5. To view XML data log files:a. Make sure the HachDatalog.xsl style sheet exists in the devicefolder.b. Open the Excel application.c. Go to File, Open.d. Select the data log file.e. In the Import XML dialog box, select Open the file with thefollowing style sheet applied and select HachDatalog.xml.f. Click OK to view the data.6. To view binary data log (.flg) files:a. Make sure the device driver (.flg.drv) file exists in the device folder.b. Open Data Com.c. In the File Viewer section, click Open.d. Select the data log file.The data log file is shown in the box and a comma separated values(csv) file with the same file name is created. This csv file can beopened in Excel.Firmware updates with SD cardsThe latest firmware updates can be placed on an SD card. The SD cardcan then be used to update the controller or device firmware.A PC and a USB card reader or other device capable of reading an SDcard are necessary.1. Attach the card reader device to the PC and install the SD card in thedevice.2. In the directory of the SD card, open the HACH folder.3. Select the Firmware folder.The list of device folders is shown. If a device is not in the folder list,install the SD card in a controller that has the device installed. Thecontroller will create the device folder in the Firmware folder.4. Move or copy the latest firmware files from their source to the correctdevice folder. The latest firmware can be found at http://www.hach.com/scsoftware.5. Remove the SD card and follow the instructions in this manual toupdate the controller and device firmware.Using the service portThe service port is used to download data files from the controller. Todownload data and update software, use the service port in combinationwith DataCom and a service cable (LZX887). The service port can also beused to update controller and sensor firmware.Using DataComWhen using the service port, it is necessary to use DataCom. DataCom isa PC Application Utility that downloads data log and event log files fromEnglish 33