ONMODE FAN SWINGTEMPCLOCK SETTIMER SLEEPRESETFILTER RESETON/OFFAM AM12 43SETOPERATION11TIMER operationHintsSet Clock correctly before starting Timer operation.You can let unit start or stop automatically at following time: Before you wake up in themorning, or get back from outside or after you fall asleep at night.Operation mode will be displayed on LCD.Power indicator lights up.(2)TIMER mode selectionPress TIMER button to change TIMER mode.Every time the button is pressed, display changesas follows:Select your desired TIMER mode (ON or OFF)(3)Timer settingPress TIME button.Every time the button is pressed, time increases 10min.If button is kept depressed, time will change quickly.Every time the button is pressed, time decreases 10min.If button is kept depressed, time will change quickly.Time will be shown on LCD. It can be adjusted within24hours.(4)Confirming your settingAfter setting correct time, press SET button to confirm"ON" or "OFF" stops flashing.Time displayed: Unit starts or stops at x hour x min (ONor OFF).Timer mode indicator lights up.TIMER ON/OFFTo cancel TIMER modeJust press TIMER button several times until TIMER mode disappears.Wire controller possesses memory function, when use TIMER mode next time, justpress SET button after mode selecting if timer setting is the same as previous one.(1)After unit start, select your desiredoperation mode.blankONOFFON OFF