OperationHaier LCD HDTV EN-12PressB VOL+/ ENTER button to enter the menuand CH+/- button to go up and down to select thedesired option.PressC VOL+/ ENTER button to confirm and CH+/-button increase and decrease the level to adjust theselected option to your preference.Repeat step 2 and step 3 until desired audio qualityDhas been achieved.FunctionBalance:Y Press CH+/- button and VOL+/ENTER toconfirm, then press VOL+/- to adjust the audiooutput between left and right speakers.BassY :Press CH+/- button and VOL+/ENTER buttonto confirm, then press VOL+/- to increase ordecrease the level of the lower-pitched sounds.TrebleY :Press CH+/- button and VOL+/ENTERto confirm, then press VOL+/- to increase ordecrease the level of the higher-pitched sounds.SRS TS XTY : To turn the simulated surround sound onor off.EqualizerY : To adjust the equalizer Off /Rock /Pop /Live/Dance/ Techno /Classic and Soft.SpeakerY : To adjust the speaker on or off.SPDIF TypeY : To adjust the SPDIF output: Off /DolbyDigital and PCM.AVLY : This will reduces the differences in volume levelamong broadcasters.Audio OnlyY : Press VOL+/ENTER button to confirm,the following display will appear on the screen:Press VOL- to select OK, then press OK to confirm. TheTV screen will be black and no picture , but the soundis still normal.Press POWER button to exit Audio Only modeOK CancelYou can press POWER button to reveal the picture onthe screen.SAP Broadcasts SetupThis TV can receive MTS stereo programs and SAP(Secondary Audio Program) that accompanies the stereoprogram; if the station transmits an additional soundsignal as well as the original one.When having selected SAP button on the remotecontrol, this TV can only receive the signal when the TVstation transmits the proper signals.Mono sound is automatically received if the broadcastis only in Mono; even though Stereo or SAP has beenselected.Select Mono if you want to listen to mono sound duringstereo/SAP broadcasting.Stereo or SAP can be received in a Analog channel.Use the SAP button to select your desired MTSA mode in a analog signal. Each time you press theSAP button, Mono, Stereoor SAP appear. If otherlanguages are available on the digital signal, selectthem with the SAP button.Press EXIT button to save and return to TV viewing.BChannel Menu OptionsChannel menu will appear in main menu only in TVmode.PressA MENU button and CH+/- button until thefollowing menu appears on the screen.ChannelVideoAudioChannelLockFunctionSelect BackEXITTuner Mode AntennaChannel ScanChannel SkipChannel LabelsTime Shifting Mode OnCH+/-VOL+/-PressB VOL+/ ENTER button to enter the menuand CH+/- button to go up and down to select thedesired option.PressC VOL+/ ENTER button to confirm and VOL+/-button increase and decrease the level to adjust theselected option to your preference.Repeat step 2 and step 3 until desired audio qualityD has been achieved.FunctionTuner ModeY :Press VOL+/ENTER button to select