Haier HL24XK2 Owner's Manual

Also see for HL24XK2: Troubleshooting guide Service manual

Haier HL24XK2 Owner's Manual Manual pdf 7 page image

IntroductionHaier LCD HDTV EN-61 PICTURE Press repeatedly to cycle through the available picture modes2 ARC Select the aspect ratio3 CCD (closed caption) Select a closed caption option4 INPUT Show the input source5 MENU Press to open the on-screen menu6 Thumbstick (Up/Down/Left/Right)Volume/Channel Selection, Allows you to navigate the on-screenmenus and adjust the system settings to your preference.7 EXIT Clears all on-screen displays and returns to TV viewing from anymenu8 USB Press to switch input source to USB in9 USB PLAY/PAUSE0 USB fast reverseA USB fast forwardB DISPLAY Press to display the TV status information on the top of the TV screenC GUIDE Display the guide when you are watching analog or digital channelsD Power Press to turn on and off the TVE AUDIO Press to cycle through different sound settingsF SLEEP button Press to display the sleep timer optionG MTS/SAP Select MONO, STEREO, SAP in NTSC systemH Number buttons Press to change a channelI • button Press to select digital channels. For example, to enter “54-3”,press “54”, “• ” and “3”J MUTE Switches the sound on or offK ENTER Accesses the highlighted item in the on-screen menuL RECALL Press to jump back and forth between two channelsM USB REPEATN USB STOPO USB Next ChapterP USB Previous ChapterQ CH.LIST Open the channel list in TVR FAVORITE Open the favourite channel list in TVPICTURECCDINPUTARCMENUVOL-EXITUSB PLAY/PAUSEREVDISPLAY GUIDE MTS/SAPCH+CH-VOL+ENTERSTOPPREVFAVORITEAUDIOSLEEPREPEATNEXTCH.LISTMUTERECALL12345678910111213141516171819202122232425262728RedUP DOWN LEFT RIGHTGreen Yellow BlueColor buttonsWhen functions are attached to thecolor buttons, the color buttons areshown on screen.Remote controlThe remote control cannot be operated unless the batteries are properly loaded.When using the remote control, aim it at the remote sensor on the TV.Remote ControlBattery loading1. Slide open the cover of the battery compartment onthe back of the remote controller.2. Load two (AAA) alkaline batteries in the compartment,(plus and minus poles to respective mark)3. Replace the cover of the battery compartment.Precautions1. As strong light may interfere the signals, changeyour position to operate the remote controller if thetelevision cannot be turned on or off as you expect.2. Keep the remote controller away from heat source orhumid area to ensure effective performance of theremote controller.3. Make sure that two AAA alkaline batteries areloaded. The batteries must be of the same type. Thebatteries must be located properly. The batteries are notrechargeable.4. Make sure that there is no obstacle between theremote controller and television set.