221111YY PbPb PrPr LL RRLL LLRR RRVIDEOVIDEO VIDEOVIDEOS-VIDEOS-VIDEOVGAVGAVGA AUDIOVGA AUDIOAUDIOAUDIO AUDIOAUDIOLLRRDVI AUDIODVI AUDIOAUDIOAUDIO22LL RRAUDIOAUDIOCOMPONENT INCOMPONENT INVIDEO INVIDEO IN11AV OUTAV OUT VGA INVGA IN HDMI INHDMI IN ANT INANT INOPTICAL OUTOPTICAL OUTHow to connect1. To get the best picture quality, adjust the VGA graphics card to 1024x768 .2. Use the TV`s VGA or DVI (Digital Visual Interface)Audio IN port for audio connections, depending on your computerconnector.If the graphic card on the computer does not output analog and digital RGB simultaneously, connect only one ofeither VGA IN or HDMI IN to display the VGAon the TV.If the graphic card on the computer does output analog and digital RGB simultaneously, set the TV to either VGA orHDMI ; (the other mode is set to Plug and Play automatically by the TV.)3. Then, make the corresponding audio connection. If using a sound card, adjust the VGA sound as required.How to use1. Turn on the computer and the TV.2. Use INPUT on the remote control to select VGA or HDMI source.3. Check the image on your TV. There may be noise associated with the resolution, vertical pattern, contrast orbrightness in VGA mode. If noise is present, change the VGA mode to another resolution, change the refresh rate toanother rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the VGAgraphic card can not be changed, change the VGAgraphic card or consult the manufacturer of the VGA graphic card.Note1.Use a DVI cable.2.Avoid keeping a fixed image on the TV's screen for a long period of time. The fixed image may become permanentlyimprinted on the screen.3. The synchronization input form for Horizontal and Vertical frequencies is separate.ResolutionFramefrequency(Hz)VGASVGAXGA640x480 60Hz800x600 60Hz1024x768 60HzMode ResolutionExternal Equipment ConnectionsInstallation75HzConnecting a computerOwner s Manual 1375Hz