Haier HL32K Owner's Manual

Also see for HL32K: Owner's manual Service manual

Haier HL32K Owner's Manual Manual pdf 19 page image

This TV set has two methods to set channels, which arerespectively Channel Scan, Channel Skip.In this section, how to use the remote control to setchannel is explained. You can also use buttons on the TV toset channel.NoteThe Channel menu will be only operated in normal TV mode.Channel menuOperationOwner s Manual 191. Press MENU button and then use / button to selectChannel menu.2. Press or OK button to select Tuner.3. Press button to select Cable or Antenna mode.4. Press / button to select Channel Scan.5. Press or OK button to start searching.6. To cancel searching, press EXIT button./NoteWhen Antenna is selected, the TV will detect antennasignals and will search for antenna TV (NTSC andATSC) channels available in your local area.When Cable is selected, the TV will detect cablecompany supplied signals and will search for cable TV(NTSC,QAM modulated) channels available in yourArea.Channel ScanChannel Skip1 Press MENU button and then use / button to selectChannel menu.2 Press button and then use / button to selectChannel Skip.3 Press / button to select a channel, then press OKbutton to toggle between and ... or OK.A skip channel is skipped when using CH+ and CH-button to browse the channels. A skip channel canbe watch by key-in the channel number or select bylist.Default un-scanned analog channels are skip.Channel with a check icon is a skipped channel.Status: AntennaAnalog Channels: 19Digital Channels: 064%Scanning123455-1678910AnalogAnalogAnalogAnalogAnalogDigital KPIX-DTAnalogAnalogAnalogAnalogAnalogVideoVideoVideoVideoAudioAudioAudioAudioChannelChannelChannelChannelLockLockLockLockFunctionFunctionFunctionFunctionChannelChannelChannel ScanChannel SkipTuner AntennaChannel ScanChannel SkipTuner AntennaChannel ScanChannel SkipSelect/ BackScan EXITOKSelectSelect//BackBackEnterSetEXITEXITOKOKCancelEXIT