Haier HL32K2a Important Safety Instructions Manual

OperationEN-13 Haier LCD HDTVOperationIn the manual, the OSD (on screen display) may bedifferent from your TV’s, because it is just an example tohelp you with the TV operation.There are several options you might need to set up inorder for your TV to work properly. Read the instructionsthat follow.Initial Setup: Set according to the screen display.Switching On/Off the TV setFirst, connect power cord correctly.ASelect the viewing source by usingB INPUT button onthe remote control.When finished using the TV, pressC POWER button onthe remote control. The TV reverts to standby mode.If you intend to be away on vacation, disconnect theD power plug from the wall power outlet.NoteIf the TV in power on , the screen show informationRaccording the type of input signal, the informationwill disappear. If there is no signal, “No Signal” willdisplay on the screen.Choose the Menu LanguageWhen you start using your set for the first time, youmust select the language which will be used fordisplaying menus and indications.ChooseA TV Input and then press MENU button.PressB 5/6button to select Function menu.PressC 4/ ENTER button and then use 5/6buttonto select Language.PressD 3/4button to select language.( English, Spanish or French)FunctionLanguage EnglishOSD Timeout ShortOSD Transparency MiddleScreen Mode NormalDCR OnBlue Screen OnTime SetupClosed CaptionDefaultSelect BackEXITVideoAudioChannelLockFunctionDPMS On/Choose the Input sourceChange the picture source so you can watch yourTV, VCR, DVD, Cable , or any other devices that areconnected to your TV.PressA INPUT button to enter the Select Source menuand then use 5/6button to select the desireditems (TV, Video , Component 1, Component 2, PC,HDMI 1, HDMI 2, HDMI 3, HDMI 4).PressB ENTER button to confirm .Channel menuThis TV set has two methods to set channels, whichare respectively Channel Scan, Channel Skip.In this section, how to use the remote control to setchannel is explained. You can also use buttons on theTV to set channel.NoteThe Channel menu will be only operated in normalRTV mode.Channel ScanPressA MENU button and then use 5/6button toselect Channel menu.PressB 4/ ENTER button to select Tuner.PressC 3/4button to select Cable or Antennamode.PressD 5/6button to select Channel Scan.