Haier HL40B Owner's Manual

Also see for HL37B - 37" LCD TV: Owner's manual Service manual

Haier HL40B Owner's Manual Manual pdf 10 page image

Pr2Pb2Y2ANT IN Pr1Pb1Y1 L RL R S-VIDEO VIDEO L RAV OUT L RVCR connectionNOTE: All cables shown are not included with the TV.There are several ways to connect your television, depending on the components you want to connectand the quality of the signal you want to achieve. The following are examples of some ways to connectyour TV. Choose the connection which is best for you.External Equipment ConnectionsChoose Your Connection- To avoid picture noise (interference), leave an adequate distance between the VCR and TVConnection Option 1Set VCR output switch to channel 3 or 4 andthen tune the TV to the same channel number.Connection Option 21. Connect the audio and video cables from theVCR's output jacks to the TV input jacks, asshown in the figure.When connecting the TV to VCR, match thejack colors (Video = yellow, Audio Left = white,and Audio Right = red).If you connect an S-VIDEO output from VCR tothe S-VIDEO input, the picture quality isimproved; compared to connecting a regularVCR to the Video input.2. Insert a video tape into the VCR and pressPLAY on the VCR. (Refer to the VCR owner`smanual.)3. Select the input source with using theINPUT button on the remote control, andthen press / button to select the source,press the button to confirm.Installation10 TV LCD-TFT