Haier HL40B Owner's Manual

Also see for HL37B - 37" LCD TV: Owner's manual Service manual

Haier HL40B Owner's Manual Manual pdf 11 page image

RR S-VIDEO VIDEO L RAV OUT L RPr2Pb2Y2Pr1Pb1Y1 LLRR S-VIDEO VIDEO L RAV OUT L RPr2Pb2Y2Pr1Pb1Y1 LLHow to connect1. Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr) to the Y, Pb,Pr jacks on the TV and connect the DVD audio outputs to theYPbPr Audio IN jacks on the TV, as shown in the figure.2. If your DVD only has an S-VIDEO output jack, connect thisto the S-VIDEO input on the TV. as shown in the figure.NOTE: If your DVD player does not have component videooutput, use S-Video.How to use1. Turn on the DVD player, insert a DVD.2. Use the INPUT button on the remote control to select YPbPrmode.3. Press Play button on external equipment for program play.4. Refer to the DVD player's manual for operating instructions.DVD connectionExternal Equipment ConnectionsHow to connectConnect the audio and video cables from the external equipment'soutput jacks to the TV input jacks, as shown in the figure.When connecting the TV to external equipment, match thejack colors (Video = yellow, Audio Left = white, and AudioRight = red).How to use1. Select the input source with using the INPUT button onthe remote control.2. Press the / button to select the desired source.3. Press the ok button to confirm2. Operate the corresponding external equipment.External A/V Source SetupVideo Game SetCamcorderComponent Input portsTo get better picture quality, connect a DVD player to the componentinput ports as shown below.InstallationComponent portson the TVVideo output portson DVD playerY Pb PrY Pb PrY B-Y R-YY Cb CrY P PB ROwner s Manual 11