Haier HL40B Owner's Manual

Also see for HL37B - 37" LCD TV: Owner's manual Service manual

Haier HL40B Owner's Manual Manual pdf 18 page image

This TV set has three methods to set channels, which are respectively Auto Scan, manual Scan fine tune.In this section, how to use the remote control to set channel is explained. You can also use buttons on the TVset to set channel.A password is required to gain access to Channel menu if the Lock of Edit program menu is turned on.Automatic ScanNote : the Channel menu will be only operated in normal TV mode.Channel menu- Automatically finds all channels available through antenna or cable inputs, andstores them in memory on the All Channel List.When Air is selected, the TV will detect antenna signals and willsearch for antenna TV (NTSC and ATSC) channels available inyour local area.When Cable is selected, the TV will detect cable company suppliedsignals and will search for cable TV (NTSC,ATSC, QAM modulated)channels available in your area.1 Press the MENU button and then use / button to select theChannel menu.2 Press the button and then use / button to select Tuner.3 Press the button and then use / button to Select Cable orAir mode.4 Press the OK button5 When you are satisfied with your choice, press MENU button toreturn to the previous menu.6 Press the / button to select Auto Scan.7 Press the button and press the OK button to start searching.8 To cancel searching, press the OK button.: Move cursor, /OK: Go to submenu, EXIT/ MENU: Exit main menuBCAVideoAudioTimeChannelFunctionLockTuner AirAuto ScanManual ScanFine TuneEdit ProgramRenameAirCableBCAVideoAudioTimeChannelFunctionLockOK CancelAir Tuner Number: 47Found: 1Tuner AirAuto ScanManual ScanFine TuneEdit ProgramRenameOperation: Move cursor, OK: Enter, MENU: Return to upper menu,EXIT: Exit main menu18 TV LCD-TFT