Function SetupFunction SetupIt is possible to select Menu Language, OSD translucent, position and screen display of MENU as follows:1. Press MENU button once, and then use VOL+/- button until the following menu appears on the screen:Menu Language EnglishOSD Timeout 15secondsMenu Background TranslucentCalendarAuto Off OffBlueScreen OffClose Caption OffParentalAvBCA2. Press the VOL+ button and then use CH+/- button on the remote controller to enter MENU of system setup.3. Press CH+/- to select desired option on MENU.4. Press VOL+/- to adjust selected option.Menu Language OptionRepeat step 3 and 4 to select English, Francais or Espanol as MENU Menu Language.OSD Timeout OptionRepeat step 3 and 4 to select menu display time for 5,10,15, 20, 25, 30 or 40 seconds.Menu Background OptionRepeat step 3 and 4 to select OSD background between Translucent and Opaque.Function SetupAuto OffRepeat step 3 and 4 to select On/Off. If On is selected, and there is no signal to the TV for 2 minutes , Auto Off willbe on the screen and for 3 minutes the TV will be in standby condition . If Off is selected , and there is no signal to theTV for 3 minutes without any operation , screen protection will be on the screen .Calendar Display and CheckRepeat step 3 and press VOL+/- button to enter calendar menu as follows:Enter Calendar menu, press VOL+/- and CH+/- button toadjust or check the date.BlueScreenRepeat step 3 and 4 to select blue Screen between off or on.