Lock SetupLock SetPassWordTuning Lock OffPreset Prog. OffProg. Num 1Source LockChild Lock OffMax Volume 100UnLockChange PasswordThe password can be changed. Press CH+/- button and selectPassword. Press VOL+/- or ENTER button, the screen will displayOld Pw.----, which will stay on the screen if a wrong passwordis entered. If correct password is entered, the screen willdisplay New Pw.----. Then enter the new password, and the screen will displayConfirm----. If the same password is entered correctly twice, the old password will be changed. If the same passwordis not correctly entered twice, the screen will display New Pw.----, then you have to reenter the password.Note:The initial password is 0000, and the security default password is 9443. If Unlock is activated, the passwordsetup cannot be changed.Lock Menu OptionsLock Menu OptionsPress LOCK button on remote control, Password will appear on the screen. If password is correctly entered, the Lock set menu will bemenu willl be entered. If the password is not correctly entered, you will be required to reenter the password and the cursor will stayAt the first place. Press EXIT to erase the window. If time you set in OSD menu expires after the latest press, MENUwill disappear automatically.- The TV has the function of security default lock. Password needs to be entered when the program lock mode is to be set.Press CH+/- to select Tuning Lock and VOL+/- to set On/Off. (To set On, some operation such as search will benot available. When enter the SYS. menu, Tuner Lock will be on the screen, and the time will be the same withthe main menu if no operation. If you want to operate SYS. menu, you need to enter the Lock menu to set TuningLock Off or operate UnLock.Tuning LockPreset Prog.Preset Prog. is opted for setting up start signal resource. Press CH+/- button to select Preset Prog. Press VOL+/-button, sources can be swapped in TV/AV1/SVideo/AV2/YPbPr/VGA/DVI/Off mode. After setup, the set mode will beentered if the TV is switched off and on again.entered if the