11To set the Timer for a 1-hour to 24-hour delay before theair conditioner is turned off (the air conditioner must beOn):1. Press TIMER. Timer OFF indicator light on the air conditionercontrol panel will flash.2. Press the TEMP/TIME up or down arrow button to change thedelay time from 1 hour to 24 hours.3. After 5 seconds, Timer OFF indicator light on the airconditioner control panel will remain on.To set Timer to turn on the air conditioner, keepingprevious settings:1. Turn on the air conditioner.2. Press TIMER. Timer On indicator light on the air conditionercontrol panel will flash.3. Press the TEMP/TIME up or down arrow button to change thedelay time from 1 hour to 24 hours.4. After 5 seconds, Timer On indicator light on the airconditioner control panel will remain on.To set Timer to turn on the air conditioner, changing theprevious settings:1. Turn on the air conditioner.2. Adjust the mode to Fan, Cool, Energy Saver or Dehum.3. For Fan, Cool or Energy Saver mode, adjust the fan speed toHigh, Med or Low.NOTE: Remote control may differ in appearance.NOTE: One CR2025 battery (included) powers the remotecontrol. Replace battery after 6 months of use, or when theremote control starts to lose power.Press ON/OFF to turn on the air conditioner.Press MODE to choose Fan, Cool, Energy Saver or Dehum.Press SPEED to choose High, Med or Low.PowerTemperatureTimer■ Press the TEMP/TIME up arrow button to raise thetemperature. Each time you press or hold the TEMP/TIME uparrow button, the temperature will go up 1ºF until it reaches86°F (30°C).■ Press the TEMP/TIME down arrow button to lower thetemperature. Each time you press or hold the TEMP/TIMEdown arrow button, the temperature will go down 1ºF until itreaches 61°F (16°C).ModeSpeedUsing the Remote Control