Haier LY26R3A Instruction Manual

Also see for LT26K3: Instruction manual

Haier LY26R3A Instruction Manual Manual pdf 10 page image

Playing Music1. After entering USB main interface,press to select “MUSIC”.2. Press OK to confirm the selectionand enter the music file list.3. Press and “OK” button to select the music you want to play then pressto play the music.PLAY/PAUSE button4. To return to the main menu just press BACK repeatedly.//Press PREV/NEXT ” to select the last or next music.Press “STOP ” to stop the music being played,when the current interface is the musicbeing played.Press “ ” to achieve the REV (fast back) and FWD (fast forward) of musicbeingplayed.the/NOTE: You can enjoy the music and the picture at the same time.USB MODEOKPlaying a Movie2. Press OK to confirm the selectionand enter the movie file list.3. Press and “OK” button to select the movie you want to play and then pressPLAY/PAUSE button to play the movie.4. To exit playing, just press BACK repeatedly.1. After entering USB main interface, pressto select “Movie”.//Press ZOOM to magnify the picturePress PREV/NEXT ” to select the last or next movie.Press “STOP ” to stop the movie being played.USB MODEOKText1. After entering USB main interface,press to select Text .2. Press OK to confirm the selectionand enter the text file list.4. To exit the Text mode just press BACK repeatedly.3. Press and OK” buttontoselect the text you want to play andthen press PLAY/PAUSE button to play the text .//Press PREV/NEXT ” to select the last or next text.USB MODENOTE: You can enjoy the music and the text at the same time.OKIMPORTANT : USB device should be format as FAT32 format byyour PC before insert to the USB connector.Using External USB Disk For Recording1. Insert the USB device with FAT32 format into the USB1connector. Then, press MENU button.2.Press button to select FUNCTION menu,press button to enter .3.Press button to select Recorder. Press OKbutton to enter the submenu.MenuSelect Disk USB1 C:Check File System startUSB DiskFormatTime Shift SizeSpeedOkOkOkFile System SizeFile System Size AllSD 27Min HD7MinOK CANCELFormatDo not unplug USB deviceFormating.....Time Shift SizeTime Shift Size AllSD 14Min HD4MinOK CANCEL4.Press button to Select Disk and pressor OK button to enter. Press button toselect disk if your device has several disks.5.Press button to select Format and press toenter. Press button to select the size you wantto format .Press OK button to format the USB Disk.NOTES: The system will format the whole device andif your device size is bigger than 1GB, you can setthe size which is used for time shift.6.Format may take several minutes and the time isdepending on the memory size. Press buttonto select the Time Shift Disk Size. The max device sizefor Time Shift is 8GB.Then, press OK button to save.NOTES: If you select all the size format for time shift,you can not do any recording.7.Waiting for the system checking. And you can see the speeddata after the success checking.NOTES:1. Only have to format when you use the device for record for the first time.2. The minimum device size for record is 1GB. Provide device formatting functionis up to 2TB. The max Multi-Partition is 16 partitions and one is active at a time.3. Bit rate:Device bit-rate>4.5MB/s REC is safe at HD streamDevice bit-rate>1.5MB/s REC is safe at SD streamDevice bit-rate<600KB/s REC is bad for REC4. The system can not work normally if the USB device have the listing problembelow:The device has bug.The device has error block.The device reports the unfaithful size.Note: Only USB1 is available for recording.