Haier TFT-LCD Owner's Manual

Also see for L42A9-AK: Owner's manual Owner's manual Owner's manual Service manual

If the color of some channel is abnormalUsually this should be set in theauto position. However if the colordisplayed on the screen are incorrect,you can manually select the correctcolor system.Press the menu and VOL+/- button,till the picture menu shown on theright will display on the screen.Press the CH+/- buttons to select "sound sys.", then press theVOL-/+ buttons to select the correct sound system. In general,you can set it as " .D/K"If sound is abnormalIf picture color is abnormalPress the CH+/- buttons to select "color sys.", then press theVOL-/+ buttons to select the correct color system. In general,you can set it as "AUTO".Watching TV Program continuedWatching TV program19Color Sys. AutoSound Sys. D/KManual SearchStore Program ---Fine Tune 49.75MHzSkip OffAuto SearchProg. SwitchBCAColor Sys. AutoSound Sys. D/KManual SearchStore Program ---Fine Tune 49.75MHzSkip OffAuto SearchProg. SwitchBCA3. press VOL-/+ button to set Skip On.4. press MENU exit.After the programs are presetting, you can skip someprograms so that to select your favorite channels only.1. Press CH+/- button or Direct-digitchoosing button to select a channeldirectly (take channel 18 forexample).If you want to recover the skipped channel1. Use Direct-digit Choosing button to select the numberof the channel to be recovered.2. Do the above steps again.3. Press VOL+/- button to set Skip OFF.Skip2.Press MENU CH+/-and VOL+/-button, till the TUN. menu shownon the right will display on thescreen.