Haier TFT-LCD Owner's Manual

Also see for L42A9-AK: Owner's manual Owner's manual Owner's manual Service manual

In VGA and DVI input mode, H-Position and V-Position can be adjusted to eliminatetransverse line interference.PC setting12 PressPress CH+/- buttons toselect RGB, then press VOL-/+ buttons to enter the submenu.CH+/- buttons toselect the desired item, pressVOL+/- button to adjust.Multiple picture position setting31NOTE As the frequency ofdisplay differ in PC deviceyou may select the appropriatefrequency to obtain desired effect.If the signal of receive is excess,the picture can be not displayedor wrong on the screen.This is opted for adjustment of picture location requency andphase parameters in VGA mode.(After the operation, completewill be on the right of the operation)In VGA , if no signal input, the Auto Sync will be no adjustable.Sequence frequency H-frequencyKHz Remark31.537.8848.36606060DOSVESAVESANoteV-frequencyHzRecommendatory frequency as follow:(Continue)Display Mode NormalColor Temperature NormalBlack Stretch OnAdjustRGBDefaultAuto Sync.BCARedGreenBlueBCA000RGB is opted for adjustmentof the numerical value of red,green and blue in VGA/DVImode.DefaultAuto SyncRepeat step 1 and 2 to set the Default.This is opted for adjustment of parameters to delivery setupin VGA mode.(After the operation, complete will be on theright of the operation)Repeat step 1 and 2 to set the .Auto SyncAdjust menu