Haier WINE BANK 60 User Manual

Also see for 5: Quick start guide User manual User manual User manual User manual

Use EN182. Touch keysThe buttons on the control panel are touch keys, which respond when lightly touched with1. Before first use▶ Remove all packaging materials. This includes the foam base and all adhesive tapeholding the wine cellar accessories inside and outside. Keep them out of children’sreach and dispose them in an environmentally friendly manner.▶ Clean the inside and outside of the appliance with water and a mild detergent beforeputting any wine in it.▶ After the appliance has been levelled and cleaned, wait for at least 2 hours beforeconnecting it to the power supply. If your wine cellar has been tilted for any reason,wait 24 hours before plugging it in. See section INSTALLATION.▶ Once you have plugged the unit into an electrical outlet, let the unit run for at least30 minutes to acclimatize itself before making any adjustments.▶ The temperature is automatically set to 12 °C. If desired, you can change the tem-perature manually. Please see TEMPERATURE.3. Description for control panelHD E FA B C G4. Automatically locking function5. Power button functionThe control panel automatically locks from any key presses after 30 secondsfrom being enabled,the is light.To activate keylock press the buttonfor 3 seconds, when locked the back lit LED lights will dim. Button A is not locked .Press the button H for 5seconds, the wine cellar cuts off the power.Thencellar power on.A Interior light buttonB °C /°Fconvertion buttonC Temperature adjust button:downD DisplayE Temperature adjust button:upF Mode buttonG Lock buttonH Power button