Hama DIR90BT Operating Instructions Manual

Hama DIR90BT Operating Instructions Manual Manual pdf 28 page image

2317.3 Time/ Date settingsTo access the time settings, proceed as follows:• Press [ ] (4) to go to the system settings.• Use [NAVIGATE/ENTER/VOLUME] (9) to navigateto the "Time and Date" menu item.• Confirm the selection by pressing [NAVIGATE/ENTER/VOLUME].• Use [NAVIGATE/ENTER/VOLUME] to navigate to the"Update settings" menu item.Auto updateUpdate from InternetChoose this option to set the time and date automaticallyfrom the internet. Set the timezone of your current location(Set timezone) and, if desired, turn on automatic adjustmentbetween summer time and winter time(Daylight savings -> ON).Update from DAB / FMIf automatic time and date adjustment is activated, the devicereceives time and date information from the station overthe FM/DAB/DAB+ radio network. This is the best way toensure that the clock will run accurately and the alarm willtrigger at the correct time, even after power outages.No updateThe time and date (DD-MM-YYYY) must be set manually;no automatic calibration takes place.Time/ Date settingsSet the date (DD-MM-YYYY) and time (hh:mm) manuallyusing [NAVIGATE/ENTER/VOLUME].FormatChoose between 12 and 24 hours format.17.4 LanguageThe first time it is used, the radio's default language is German.To change radio's menu language, proceed as follows:• Press [ ] (4) to go to the system settings.• Use [NAVIGATE/ENTER/VOLUME] to navigate tothe "Language" menu item. Confirm the selection bypressing [NAVIGATE/ENTER/VOLUME].• Use [NAVIGATE/ENTER/VOLUME] to select your preferredsystem language.• The language setting currently selected is marked withan asterisk (*).NoteThe following languages are available:English, German17.5 Factory resetTo reset the radio to the factory default settings, proceedas follows:• Press [ ] (4) to go to the system settings.• Use [NAVIGATE/ENTER/VOLUME] (9) to navigateto the "Factory settings" menu item.• Confirm the following prompt with YES to reset theradio to the factory default settings. All settings madepreviously are deleted.• To abort the deletion process, press [ ] or select NO.NoteResetting to the factory default settings can remedy someproblems and malfunctions.• However, all settings made previously, such as equaliserand presets, permanently deleted.