Hama DIR90BT Operating Instructions Manual

Hama DIR90BT Operating Instructions Manual Manual pdf 29 page image

2417.6 Software updateImprovements and new features are always constantlybeing developed for the software used in our radios toresolve potential errors, increase the range of functions,and so on. We recommend that you always install anyavailable updates on your radio.Proceed as follows:• Press [ ] (4) to go to the system settings.• Use [NAVIGATE/ENTER/VOLUME] to navigate to the"Software update" menu item.• Select Automatic updates (YES) to allow the radioto automatically check for new software updates ona regular basis. (Recommendation)• Choose Check now to manually start a check forsoftware updates.Warning• Make sure that the radio has a stable power supplybefore you start a software update.• Power supply failure during a software update cancause irreparable damage to the radio.Update portThe update port allows you to load software updatesmanually. The procedure for automatically updating thesoftware can be found under 17.6 Software updates.Note• Available updates and instructions on how to installthem can be found at: www.hama.com -> 0005489317.7 InfoTo check the current software version, radio ID and devicedesignation of your radio, proceed as follows:• Press [ ] (4) to go to the system settings.• Use [NAVIGATE/ENTER/VOLUME] (9) to navigateto the "Info" menu item.• Confirm the selection by pressing [NAVIGATE/ENTER/VOLUME].NoteIf you require assistance from customer support,please let the agent know the current software version.Problems are frequently resolved through softwareupdates, and your query may be resolved by comparingyour software version with the last software versionavailable.If updates are available, these can be found at www.hama.com with the corresponding article number ordesignation of the radio.You may find update instructions in the article'sdownload area.17.8 Setup wizardYou can restart the setup wizard (see Setup wizard) atany time as follows:[ ]System settingsSetup wizard17.9 LightingThe backlight can be configured for each operating mode(Operation Mode, Standby Mode) separately.Proceed as follows:• Press [ ] (4) to go to the system settings.• Use [NAVIGATE/ENTER/VOLUME] (9) to navigate tothe "Lighting" menu item.• Confirm the selection by pressing [NAVIGATE/ENTER/VOLUME].• You can set the brightness with [NAVIGATE/ENTER/VOLUME].NoteThe choice of lighting mode impacts on the powerconsumption.