Hama TWINS Operating Instructions Manual

Contents

14Note• The speakers always store the last eight terminal devicespaired.• The speakers will automatically connect to the last terminaldevice paired when it is switched on the next time.4.5 AutomaticBluetooth® connection (after successfulpairing)• Make sure that yourBluetooth® capable terminal device is onandBluetooth® is activated.• SMake sure that the speakers are located within theBluetooth®range of max. 10 metres.• Switch on the speakers as described in 4.1 Switching on/offthe product.∆ The status LED (2) of one speaker flashes once at regularintervals, and the status LED (2) of the other always flashestwice in quick succession.• The status LED (2) on each speaker flashes twice in quicksuccession.• An announcement confirms that connection was successful.∆ The status LED (2) of one speaker flashes once at regularintervals, and the status LED (2) of the other speaker lights upconstantly.• The status LED (2) of the individual speaker flashes once atregular intervals.Note – Connection impaired• After the speaker and terminal device have been paired, aconnection is established automatically. If theBluetooth®connection is not established automatically, check thefollowing:• Check theBluetooth® settings of your terminal device to seewhether Hama Twins is connected. If not, repeat the stepslisted underBluetooth® pairing.• Check whether your terminal device and the speaker are lessthan 10 metres apart. If not, move them closer together.• Check whether obstacles are impairing the range. If so,move the devices closer together.• Check whether the audio cable is connected to the speaker.If so, disconnect it.