IMAGETEAM™ 4410/4710 User’s Guide 7 - 17 Quick*ViewQuick*View Demonstration Software InstructionsQuick*View is a Microsoft Windows® program that displays decoded symbolmessages and captures images (for instance, ID photographs) from theIMAGETEAM 4410/4710 Imager. Bar code information and images aredisplayed in the Quick*View window.Setting Up the Imager and the Quick*View Software1. Connect the Imager to the PC’s com port (com port 1 or com port 2) via theappropriate interface cable (see "Unpacking the Imager" on page 1-2).Con-nect the appropriate power supply to the Imager. (The Imager cannot get itspower from the PC’s com port.)For Microsoft Windows 95 or NT 4.02. Insert the Quick*View diskette labelled “32 Bit Release” into Drive A or B.3. From the Start Menu, click on Run. Type “x:\setup” in the command linebox, where “x” represents a drive letter, typically “A” for the 3.5" floppy driveon most PCs. Click on OK.4. Follow the instructions in the setup screens.5. To start the Quick*View program, from the Start Menu click on Programs,Quickview, QuickView (32 Bit).Installing Quick*View from the Web1. Access the Hand Held Products web site at www.handheld.com.2. Click in the Quick Search text box and enter Quick*View.3. Click on Search Now.4. Click on the entry for Quick*View.5. When prompted, select Save File, and save the files to thec:\windows\temp directory.6. Once you have finished downloading the file, exit the web site.7. Using Explorer, go to the c:\windows\temp file.8. Double click on the Quickview.exe file. Follow the screen prompts to installthe Quick*View program.9. To start Quick*View, from the Start Menu click on Programs, Quick*View,Quick*View.
