4600g, 4600r, 4800i User’s Guide 3 - 7Presentation SensitivityPresentation Sensitivity is a numeric range that increases or decreases theimager's reaction time to bar code presentation. To set the sensitivity, scan theSensitivity bar code, then scan the degree of sensitivity (from 0-20) from theinside back cover, andSave. 0 is the most sensitive setting, and 20 is the leastsensitive.Default = 1.Streaming Presentation™ ModeNote: This feature is applicable to the 4600r only.When in Streaming Presentation mode, the imager leaves the scan illuminationon all the time and continuously searches for bar codes.When using Preferred Symbology (page 3-14), a lower priority symbol must becentered on the aiming pattern to be read in Streaming Presentation Mode.Hands Free Time-OutThe Scan Stand, and Presentation, and Streaming Presentation Modes arereferred to as “hands free” modes. If the imager’s trigger is pulled when using ahands free mode, the imager changes to manual trigger mode. You can set thetime the imager should remain in manual trigger mode by setting the Hands FreeTime-Out. Once the time-out value is reached, (if there have been no furthertrigger pulls) the imager reverts to the original hands free mode.Scan theHands Free Time-Out bar code, then scan the time-out duration (from0-300,000 milliseconds) from the inside back cover, andSave.Default = 5,000ms.SensitivityStreaming Presentation ModeHands Free Time-Out
