Hanwha Techwin Wisenet HCD-6070R User Manual

English_29Camera OperatiOnWhite bal (White balance)Use the White Balance function to adjust the screen color.1. When the SETUP menu screen isdisplayed, select ‘White Bal’ by usingthe Function Setup switch so that thearrow indicates ‘White Bal’ .2. Select a desired mode using theFunction Setup switch. Select one of the following 5 modes,as appropriate for your purpose.y ATW : Select this when the color temperature is between 1,800K and 10,500K.y OuTDOOR : Use it in a color temperature range of 1,800K to 10,500K.(includingNatrium). Auto adjustment is made to optimize the camera color to theoutdoor environment.y INDOOR : Select this when the color temperature is between 4,500K and 8,500K.Automatically adjusts the camera color for optimization to the indoorenvironment.y MANuAL : Select this to fine-tune WhiteBalance manually. Set WhiteBalance first by using the ATWor AWC mode. After that buttonto MANUAL mode, fine-tune theWhite Balance and the FunctionSetup switch.y AWCSET : To find the optimal luminance level for the current environment, point thecamera towards a sheet of white paper and press the Function Setup switch. If theenvironment changes, readjust it.M ` White Balance may not work properly under the following conditions. In this caseselect the AWC mode.1 Select this When the color temperature of environment surrounding the subjectis out of the control range (e.g. clear sky, or sunset)2 When the ambient illumination of the subject is dim.` If the camera is directed towards a fluorescent light or is installed in a place whereillumination changes dramatically, the White Balance operation may becomeunstable.MAIN SETuP1. VIDEO FORMAT AHD2. PROFILE bASIC 3. WHITE bAL ATWWb MANuAL 1. RED GAIN IIIIIIIIIIIIIIIIIIIII 1472. bLuE GAIN IIIIIIIIIIIIIIIIIIIII 1243. RETuRN