Hanwha Techwin Wisenet HCD-6070R User Manual

English_31Camera OperatiOny AGC (OFF/LOW/MIDDLE/HIGH/VERY HIGH) :The higher the gain level, the brighter the screen - but the greater the noise.y SSNR4 : This function reduces the background noise in a low luminance environment.- OFF : Deactivates SSNR4. Noise is not reduced.- ON : Activates SSNR4 so that noise is reduced.M ` When adjusting the noise reduction level in the SSNR4 mode, remember that thehigher the level set, the more the noise level will be reduced, as will the brightness ofthe image.y SSDR :SSDR illuminates darker areas of an image while retaining the same light levelfor brighter areas to even out the overall brightness of images with high contrastbetween bright and dark areas.- ON : Use the Function Setup switch to change the SSDR level in the sub menuaccording to the contrast between bright and dark areas.- OFF : Turn off SSDR function.bACKLIGHTThe camera uses high performance DSP chips that are designed to clearly display theobject and the background despite severe reverse light.1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using theFunction Setup switch. so that the arrow indicates ‘BACKLIGHT’.2. Select a desired mode using the Function Setup switch depending on the camerapurpose.y uSER bLC :Enables a user to select a desired area on a picture andview that area more clearly.- LEVEL : Adjusts the brightness level of amonitoring area.- TOP/BOTTOM/LEFT/RIGHT :Adjust the area to be enhanced.- RETURN : Return to the MAIN SETUP menu.bLC SETuP▶ 1. LEVEL M I D D L E2. TOP IIIIIIIIIIIIIIIIIIIII 33. bOTTOM IIIIIIIIIIIIIIIIIIIII 74. LEFT IIIIIIIIIIIIIIIIIIIII 35. RIGHT IIIIIIIIIIIIIIIIIIIII 76. RETuRN