DANGER: If using this fan in a DAMP location, this fan must be connected to a supply circuitprotected by a Ground Fault Circuit Interrupter (GFCI) to reduce the risk of personal injury, electricalshock or death.NOTE: This fan is remote control adaptable (remote control sold separately). Any remote controlused with this fan MUST be UL-approved for DAMP LOCATIONS.Temporarily hang fan on the tab on the mountingbracket (C) using one of the non-slotted holes inthe canopy (B).3.TabCDB3CLOSEMOUNT-STYLE FAN MOUNTINGWARNING: To reduce the risk of fire, electrical shock or personal injury, wire connectorsprovided with this fan are designed to accept only one 12-gauge house wire and two lead wires fromthe fan. If your house wire is larger than 12-gauge or there is more than one house wire to connect tothe corresponding fan lead wires, consult an electrician for the proper size wire connectors to use.CAUTION: Be sure outlet box is properly grounded and that a ground (green or bare) wire is present.WARNING: If house wires are different colors than referred to in the following steps, stopimmediately. A professional electrician is recommended to determine wiring.WIRING11Lowes.com/harborbreezeChoose wiring diagram (Fig. 1A, Fig. 1B or Fig. 1C)that fits your situation and make appropriate wiringconnections as follows: [IMPORTANT: For each wireconnection below, use one of the wire connectors (BB)provided, making sure to screw wire connector (BB) onin a clockwise direction.]1A. FAN AND LIGHT CONTROLLED BY PULLCHAINS: Connect BLACK and BLUE wire from fanto BLACK wire from ceiling. Connect WHITE wirefrom fan to WHITE wire from ceiling. Connect allGROUND (GREEN) wires together from fan (ondownrod (A) and mounting bracket (C)) toBARE/GREEN wire from ceiling.1. FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHES1AFAN AND LIGHT CONTROLLED BY PULL CHAINSBLACK (POWER)WHITE (NEUTRAL)BLACKGROUND/GREEN (BARE)WHITE120V POWERFROM CEILINGBLUE &BLACKGREEN