WIRING1C. FAN AND LIGHT CONTROLLED BY TWOWALL SWITCHES: If you intend to control the fanand light with separate wall switches, connectBLACK wire from fan to BLACK wire from theindependent wall switch for the fan. Connect BLUEwire from fan to the BLACK wire from the otherindependent wall switch for the light. ConnectWHITE wire from fan to WHITE wire from ceiling.Connect all GROUND (GREEN) wires togetherfrom fan (on downrod (A) and mounting bracket (C))to BARE/GREEN wire from ceiling.NOTE: BLACK wire is hot power for fan. BLUE wireis hot power for light kit. WHITE wire is common forfan and light kit. BARE/GREEN wire is ground.1B. FAN CONTROLLED BY PULL CHAIN, LIGHTBY WALL SWITCH: If you intend to control the fanlight with a separate wall switch, connect BLACKwire from fan to BLACK wire from ceiling. ConnectBLUE wire from fan to the BLACK wire from theindependent wall switch for the light. ConnectWHITE wire from fan to WHITE wire from ceiling.Connect all GROUND (GREEN) wires togetherfrom fan (on downrod (A) and mounting bracket (C))to BARE/GREEN wire from ceiling.12Lowes.com/harborbreezeWrap electrical tape (not included) around eachindividual wire connector (BB) down to the wire.WARNING: Make sure no bare wire or wirestrands are visible after making connections. Placegreen and white connections on opposite side of boxfrom the black and blue (if applicable) connections.Turn spliced/taped wires upward and gently pushwires and wire connectors (BB) into outlet box.2.BBWire Connector x 4Hardware UsedBBBB BB2FAN AND LIGHT CONTROLLED BY TWO WALL SWITCHESFAN CONTROLLED BY PULL CHAIN, LIGHT BY WALL SWITCHBLACKBLACK(WALLSWITCH)BLUE1BWHITEBLACK (POWER)WHITE (NEUTRAL)GROUND/GREEN (BARE)GREEN120V POWERFROM CEILINGBLACKFAN AND LIGHT CONTROLLED BY TWO WALL SWITCHESFAN AND LIGHT CONTROLLED BY TWO WALL SWITCHESBLACKBLACK(WALLSWITCH)BLUE1CWHITEBLACK (POWER)WHITE (NEUTRAL)GROUND/GREEN (BARE)GREEN120V POWERFROM CEILINGBLACK