![Harbor Breeze TILGHMAN WCK52LMW5N Installation Manual Manual pdf 17 page image](https://manuals-archive2.s3.amazonaws.com/3395987/d4fff6a9b42b6f31a6ab8eeccca7565f17f.jpg)
WARNING: Before beginning work, shut off the power supply to avoid electrical shock.PROBLEM POSSIBLE CAUSE CORRECTIVE ACTIONFan does not move. 1. Reverse switch not engaged.2. Power is off or fuse is blown.3. Faulty wire connection.4. Plugs not connected properly.1. Push switch firmly either up ordown.2. Turn power on or check fuse.3. Turn power off. Loosen canopyand check all connections.4. Check that male and femaleplugs in switch housing areconnected properly according toinstructions on page 14.Noisy operation.1. Blades are loose.2. Cracked blade.3. Full range dimmer switch.4. Fan is new.1. Tighten all blade screws.2. Replace blade.3. Replace with an approvedspeed control device.4. Allow fan a “break in” period of afew days, especially whenrunning the fan at Medium andHigh speeds.Excessive wobbling. 1. Blades are loose.2. Blade arms incorrectly attached.3. Unbalanced blades.4. Fan not securely mounted.5. Fan too close to vaulted ceiling.6. Set screw(s) on motor housing yokeis (are) not tightened properly.7. Set screw on hanging ball is nottightened properly.1. Tighten all blade screws.2. Re-install blade arms.3. Switch one blade with a bladefrom the opposite side.4. Turn power off. Carefully loosencanopy and verify that mountingbracket is secure.5. Use a longer downrod or movefan to another location.6. Tighten yoke set screw(s)securely.7. Carefully loosen and lowercanopy and verify that set screwon hanging ball is tightenedsecurely.NOTE: A small amount of "wobble" is normal and should not be considered a defect.TROUBLESHOOTING17Lowes.com/harborbreeze