REAR-PANEL CONNECTIONS 7•∞ ¶ ⁄fiª¡£‹°bdgji a™¢§ ‚ ¤›fl‡·cefhk31135135(100W, 1A MAX)(100W, 1A MAX)(50W, 0.5A MAX)(50W, 0.5A MAX)REAR-PANEL CONNECTIONS¡ FM Antenna Jack™ CD Audio Inputs£ Tape Outputs¢ Tape Inputs∞ Subwoofer Output§ Front Speaker Outputs¶ Surround Back Speaker Outputs• Surround Speaker Outputsª Center Speaker Outputs‚ Component Video Monitor Outputs⁄ Video 2 Component Video Inputs¤ DVD Component Video Inputs‹ AC Power Cord› Switched AC Accessory Outletfi Unswitched AC Accessory Outletfl Optical Digital Audio Output‡ Coaxial Digital Audio Output° S-Video Monitor Output· Coaxial Digital Audio Inputsa DVD S-Video Inputb Video 1 S-Video Inputc Optical Digital Audio Inputsd Video 1 S-Video Outpute Video 2 S-Video Inputf 6/8-Channel Direct Inputsg Video Monitor Outputh DVD Audio/Video Inputsi Video 1 Audio/Video Inputsj Video 1 Audio/Video Outputsk Video 2 Audio/Video InputsAM Antenna Terminals3334353637383940414849464744454243383940413132302829252627282930242322212031373635343332 3137363534333248495051474645444342NOTE: To assist in making the correct connectionsfor multichannel input, output and speaker connec-tions, all connection jacks and terminals are color-coded in conformance with the CEA standards asfollows:Front Left: WhiteFront Right: RedCenter: GreenSurround Left: BlueSurround Right: GraySurround Back Left: BrownSurround Back Right: TanSubwoofer: PurpleCoaxial Digital Audio: OrangeComposite Video: YellowComponent Video “Y”: GreenComponent Video “Pr”: RedComponent Video “Pb”: Blue¡ FM Antenna Jack: Connect the supplied indoor(or an optional external) FM antenna to this terminal.™ CD Audio Inputs: Connect these jacks to theanalog audio output of a compact disc player or CDchanger.£ Tape Outputs: Connect these jacks to theRECORD/INPUT jacks of an audio recorder.¢ Tape Inputs: Connect these jacks to thePLAY/OUT jacks of an audio recorder.∞ Subwoofer Output: Connect this jack to the line-level input of a powered subwoofer. If an external sub-woofer amplifier is used, connect this jack to the sub-woofer amplifier input.§ Front Speaker Outputs: Connect these outputsto the matching + or – terminals on your left and rightspeakers. When making speaker connections alwaysmake certain to maintain correct polarity by connectingthe color-coded (white for front left and red for frontright) (+) terminals on the AVR 135 to the red (+)terminals on the speakers and the black (–) terminalson the AVR 135 to the black (–) terminals on thespeakers. See page 12 for more information onspeaker polarity.¶ Surround Back Speaker Outputs: Thesespeaker terminals are normally used to power the sur-round back speaker in a 6.1-channel system. Connectthese outputs to the matching + and – terminals onyour surround back channel speaker. In conformancewith the CEA color-code specification, the brown ter-NOTE: To make it easier to follow the instructions that refer to this illustration, a larger copy may be downloaded from the Product Support section for this productat www.harmankardon.com.