Harman Kardon AVR 2700 Owner's Manual

Also see for AVR 270: Quick start guide Service manual

Harman Kardon AVR 2700 Owner's Manual Manual pdf 23 page image

23ENGLISHAVR Making Connections,To control more than one source device through the AVR’s IR Remote Out connector,connect all sources in “daisy chain” fashion, connecting each device’s IR output to thenext device’s IR input, starting with the AVR.s If you install a multizone system, connect an IR control device to the Zone 2 IR Inconnector for remote-room control of the multizone system, source devices andvolume in the remote zone.External IR ReceiverZone 2Main RoomZone 2 SpeakersAVRIf a source device is shared with the main listening area, any control commands issuedto that source will also affect the main room.Connect the Trigger OutputIf your system has equipment that can be controlled by a DC trigger signal, connect it tothe AVR’s Trigger Out connector with a mono 1/8-inch (3.5mm) mini-plug interconnectcable. The AVR will supply a 12V DC (100mA) trigger signal at this connection wheneverit is powered on.AVRDevice withTrigger In ConnectorMono 1/8-inch(3.5mm) Mini-PlugInterconnect(not supplied)Connect to AC PowerConnect the supplied AC power cord to the AVR’s AC Input connector and then to aworking AC power outlet.AC PowerOutletAVRAC InputConnectorPower Cord (supplied)