Harman Kardon AVR8000 Service Manual

Also see for AVR 8000: Brochure & specs Specifications Owner's manual Service manual

Contents

5 FRONT PANEL CONTROLS1 Main Power Switch: Press this buttonto apply power to the AVR 8000. When theswitch is pressed in, the unit is placed in aStandby mode, as indicated by the amberPower Indicator 3 surrounding theSystem Power Control 2. This buttonMUST be pressed in to operate the unit. Toturn the unit off and prevent the use of theremote control, this switch should be presseduntil it pops out from the front panel so thatthe word “OFF” may be read at the top ofthe switch.NOTE: This switch is normally left in the “ON”position.2 System Power Control: When the MainPower Switch 1 is “ON,” press this button toturn on the AVR 8000; press it again to turn theunit off. Note that the Power Indicator 3surrounding the switch will turn green whenthe unit is on.3 Power Indicator: This LED will be lit inamber when the unit is in the Standby mode tosignal that the unit is ready to be turned on.When the unit is in operation, the indicator willturn green.4 Headphone Jack: This jack may be used tolisten to the AVR 8000’s output through a pairof headphones. Be certain that the headphoneshave a standard 1/4" stereo phone plug. Notethat the main room speakers will automaticallybe turned off when the headphone jack isin use.5 Dolby Mode Selector: Pressing thisselector button cycles the AVR through thevarious Dolby surround modes. The first pressof the button switches the surround mode tothe last Dolby surround mode that was in use.The choice of modes available will vary based onthe type of input source (digital or analog) andthe number of speaker channels your system isconfigured for.6 Home THX Mode Selector: Press thisbutton to select Home THX processing. Thechoice of THX modes will vary according tothe type of input source and program material(Dolby Digital, DTS 5.1, DTS 6.1 or analog), andthe number of speakers in your system. In somecases the system will auto-default to the THXSurround EX or THX Cinema mode, while inother cases you will have a choice of modes.7 Logic 7 Mode Selector/‹ Button: Thisbutton has two functions: In normal use, pressit to select one of the Logic 7 modes. When anadjustment is being made using using theFront Panel Controls1 Main Power Switch2 System Power Control3 Power Indicator4 Headphone Jack5 Dolby Mode Selector6 Home THX Mode Selector7 Logic 7 Mode Selector/‹ Button8 Tone Mode9 DSP Surround Mode Selector) Tuning Selector! Tuner Band Selector@ 6Ch/8Ch Direct Button# Preset Station Selector$ Stereo Mode Selector/› Button% Input Source Selector^ FM Mode Selector& Optical Digital 4 Input Jack* Optical Digital 4 Output Jack( Coaxial Digital 4 Input JackÓ Coaxial Digital 4 Output JackÔ Input/Output Status Indicator Video 5 Input JacksÒ DTS Neo:6 Mode SelectorÚ Digital Select ButtonÛ DTS Surround Mode SelectorÙ Volume Controlı Input Indicatorsˆ Main Information Display˜ Remote Sensor Window¯ Surround Mode/Bitstream Indicators247 9@ Úı¯ÛÙ13 56 8 )! #$%^&Ó* ( ÔÒˆ˜AVR8000 harman/kardon