REAR-PANEL CONNECTIONS 9Rear-Panel Connections¡ Play (CDP)-Deck Analog Output: Thesejacks carry the analog audio output signal fromthe Play Deck 3 during playback, in Singlemode also from the Record Deck %, and dur-ing CD Dubbing. Connect them to the CD inputjacks on a receiver, preamp or processor.™ Record (CDR)-Deck Analog Output:These jacks carry the output signal from theRecord Deck % during playback, in Singlemode also from the Play Deck 3, and duringanalog or digital recording. Connect them to theTape Play/In input jacks on a receiver, preampor processor.£ Record (CDR)-Deck Analog Input: Thesejacks accept the analog signals that are used forCD recordings. Connect them to the Tape Recoutputs on a receiver, preamp or processor.¢ Play (CDP)-Deck Coaxial-DigitalOutput: This jack carries the digital-audio out-put signal from the Play Deck 3 during play-back, in Single mode also from the RecordDeck %, and during CD Dubbing. Connect it toa coaxial-digital input on a receiver, processor ordigital decoder.∞ Record (CDR)-Deck Coaxial-DigitalOutput: This jack carries the digital audio out-put signal from the Record Deck % duringplayback and during digital recordings, in Singlemode also from the Play Deck 3 during play.Connect it to a coaxial digital input on a receiv-er, processor or digital decoder.§ Record (CDR)-Deck Coaxial-DigitalInput: This jack accepts the digital-audio inputsignal from a compatible digital audio productand should be connected to a coaxial-digitaloutput on a CD, MD or DVD player or an A/Vreceiver or processor.IMPORTANT NOTE: The coaxial digital outputsand inputs should only be connected to digitalinput or output jacks. Even though they use thesame RCA type connector as standard analogaudio connections, DO NOT connect them toconventional analog input or output jacks.¶ Record (CDR)-Deck Optical-DigitalInput: This jack accepts the digital-audio inputsignal from a compatible digital audio product,and should be connected directly to the optical-digital output on a CD, MD or DVD player or anA/V receiver or processor.• Play (CDP)-Deck Optical-DigitalOutput: This jack carries the digital audio out-put signal from the Play Deck 3 during play-back, in Single mode also from the RecordDeck %, and during CD Dubbing. Connect it toan optical-digital input on a receiver, processoror digital decoder.ª Remote IR Input: Connect the output of aremote infrared sensor or the remote controloutput of another compatible Harman Kardonproduct to this jack. This will enable the remotecontrol to operate even when the front-panelRemote Sensor Û is blocked. This jack mayalso be used with compatible IR remote controlbased automation systems.‚ Remote IR Output: Connect this jack tothe IR input jack of another compatible HarmanKardon remote controlled product to have thebuilt-in remote sensor Û on the CDR 20 pro-vide IR signals to other compatible products.⁄ AC Power Cord: Connect this plug to anAC outlet. If the outlet is switch controlled, makecertain that it is in the ON position.¡™£¢∞§⁄ªAC 100-240V 50-60Hz 26WCDRIN¶• ‚OPTICALCDPOUT¡ Play (CDP) Deck Analog Output™ Record (CDR) Deck Analog Output£ Record (CDR) Deck Analog Input¢ Play (CDP) Deck Coaxial-Digital Output∞ Record (CDR) Deck Coaxial-Digital Output§ Record (CDR) Deck Coaxial-Digital Input¶ Record (CDR) Deck Optical-Digital Input• Play (CDP) Deck Optical-DIgital Outputª Remote IR Input‚ Remote IR Output⁄ AC Power Cord